Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Lighting

Bike Lights

$5.95
SP-12 Flex-Tight Seatpost Bracket for most CatEye taillights
$9.95
Be seen with CatEye's Omni 3 Taillight, which uses Omni Directional Technology for 360 degrees of visibility. Three super-bright LEDs light up in three different modes so you can customize the pattern and get run times up to 200 hours. Plus, CatEye's tool-free mount makes installation a breeze.
$2.95
Flexible Versatite™ mount for Dash, Zot, Dart, Hotrod, Hotshot Micro 2W, Hotshot Pro 200 (flexible mount version; not for Hotshot Pro 200C) systems. Compatible with most handlebars, seat posts, and seat stays including aero styles.
$9.95
Mount your Cygolite bicycle headlight to a variety of GoPro compatible interfaces and third-party mounting options that are compatible with the GoPro interface. - Compatible with Ranger, Expilion, Metro, and Streak series - Includes adapter piece only
$8.99
Lezyne's Composite Bar Mount is a hard mount made of a reinforced Composite Matrix cradle for a strong and secure attachment of the Mega Drive, Deca Drive, and XL LED lights to the handlebar. It is designed for 25.4 mm or 31.8 mm bars, with the cradle designed to pivot 15 degrees laterally to allow adjustment of the LED light beam angle and directing it where it is most needed. A large thumb screw secures the CM mount to the bar without need of tools, and can be tightened by hand or a 1mm hex key. Molded rubber shims add grip and fine-tune fitting to undersized bars. Composite Bar Mounts are sold in a kit with the Mega Drive, Deca Drive, or XL LED lights.
$9.99
Mount the Nip light to an e-Bike that has the specialty Pro Max stem for accessories.
$9.99
This mount securely attaches your Light and Motion Vis 180 Micro taillight to a standard rear bicycle rack (taillights and racks sold separately).
$5.00
Mounting bracket for MSW front White Bat Headlight. - Includes 1 front mounting bracket
$5.00
Replacement bracket for Pico and Tigermoth lights. - Includes 1 front bracket, 1 rear bracket, and 2 mounting straps
$7.99
The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seat posts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL Not compatible with omega 300 and sentry aero 260 tail lights.
$9.99
The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for our flagship tail light, the Sentinel. It allows you to fine-tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It's an easy on and off non-slip tail light mount that also features a grooved contact pad that makes this the 'go to' mount for riders using aero seat posts. System Compatibility - Sentinel - Solas - Sabre - CherryBomb
$9.99
All of our head light mounts deliver rock solid mounting but for those that demand the most rigid set up, the NiteRider Lumina Handlebar Clamp Mount is here to deliver a high degree of performance and stability. Fits a max bar diameter of 35mm. SYSTEM COMPATIBILITY - Lumina Series - MiNewt Cordless Series - Mako Series WARRANTY - This NiteRider accessory is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners)
$9.99
The NiteRider Lumina Handlebar Strap Mount offers a wide variety of handlebar size fitments and remains rock solid while riding through rough terrain. It’s easy to install and, like all NiteRider mounts, features a quick release tab for when it’s time to recharge or leave your bike unattended. System Compatibility: - Lumina Series - Mako Series - MiNewt Cordless Series
$9.99
If you're looking to mount your NiteRider PRO series lights to a GO Action Camera style mounting point, this is the accessory you've been looking for. The mounting point screws into the GO Action Camera style connection for a solid and secure fitment. SYSTEM COMPATIBILITY - PRO Series Not compatible with Lumina Pro lighting systems
$9.99
The NiteRider Tail Light Rack Mount gives you the option to mount your tail light directly onto your rack-ready/-equipped bike via this rack mount accessory. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL
$6.00
Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works. - Compatible with all PDW rear lights except the Asteroid and Fenderbot - Horizontal holes are 50mm apart to fit European rack standards - Vertical holes are 18mm apart to fit most reflector mounts
$4.99
- Attaches to rear racks - Compatible with: Blinky 3,5,7 and Superflash - 25mm between each of the top horizontal holes (center to center) - Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack
$5.00
- Fits seatpost (up to 31.8mm) or seatstay - Compatible with: Blinky 3,5,7, all Superflash lights and Blinky Safety rear light - Use with Blinky Safety Front light bracket to fit oversize (~31.8mm) handlebars
$5.99
- Compatible with all Blaze headlights, Beamer 1/3/5, 1200, Dual Spot, and Bright Spot bike headlights - Fits 25.4 – 31.8mm handlebars
$5.99
- Fits 25.4-31.8mm handlebars - Compatible with Blaze, Beamers, 1200, 5000x and Super Spot
$9.99
Make sure you have excellent rear visibility at night with the Blinky 3. This sweet taillight aims 3 bright LEDs directionally to provide visibility from up to a mile away. Its soft-touch power switch accesses flashing or steady modes for up to 100 hours of run time on the 2 AAA batteries (included). And, it includes seatpost and seatstay mounts.
$7.99
-Mounts easily to front racks with threaded M5 mounts -Allows for unobstructed light positioning -22.2mm clamping diameter
$4.99
• Fits all 2015 Serfas taillights • Bolts to rack for easy removal of taillight
$6.00
Use to securely mount serfas tail lights to any compatible rear rack. Serfas Tail Light Compatibility: - TBT-50R Thunderbolt 2.0 - TST-70 Scorpius 70 - TST-100 Scorpius 100 - TST-130 Scorpius 130 - TST-300 Scorpius 300 - TSV-130 Vulcan 130 - TSV-350 Vulcan 350
$8.00
Replacement Part – Universal Handlebar Bracket - Fits all current Serfas headlights with a removable bracket - Fits bars up to 31.8mm horizontal & vertical adjustable - Easily removes from bar in seconds - No tools needed - Works With: TSL-100, TSL-150, TSL-150+, TSL-200, TSL-250, TSL-250+, TSL-500, TSL-500+, TSL-1000, TSL-1500, SL-155, SL-255, USL-155, USL-305, USL-505, TSL-350, TSL-550, TSL-750, TSL-T1000, TSL-LT1000, TSL-1200, TSL-1800, TSL-2500, HL-1.1, & SL-30WP - Works for all Serfas headlights EXCEPT for SL-200 & SL40WP
$4.99 $10.00 50% Off
Increase your visibility by using the Stix Arm/Leg Band mount to attach your Specialized Stix light to arms and legs. - Includes rigid mount and fabric band for comfortable and secure hold. - Wraps around ankle to keep pant legs away from chainrings. - Increases visibility and versatility of Stix lights, both on an off the bike.
$5.00
Stick a Stix on it. This fabric clip mount makes it a cinch to clip your Specialized Stix to a bag, jacket, or jersey for on-the-go visibility. - Stainless steel spring clip for secure mounting.
$5.00
You really can put a Specialized Stix headlight almost anywhere. This headlight mount is designed to cleanly integrate into the headset of the bike and maintain a clean look with the Stix positioned just under the stem. - Positions Stix headlight just under the stem in front of the head tube for a super-clean, integrated look. - Interlocking system between plastic mount and aluminum spacer allows the light and mount to quickly be removed from the bike. - Works with 1-1/8th Aheadset-style headsets and custom 10mm thickness spacer.
$6.00
Mounts a Specialized Stix light to a CPSC, DIN standard reflector/rack bracket or the Specialized Pizza Rack. - Vertical CPSC hole pattern. - This mount can attach to the Horizontal Din hole pattern. - Specialized single hole pattern for the Pizza Rack. - Mounts Stix light horizontally. - Includes all mounting hardware.
$4.19
- Rack mount bracket only - Fits TL-L225 taillight
Page 1 of 2 Next page